Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
enable pri for locl
- Thread starter quilla
- Start date
First do a stat on 8 to find out what DCH you are using.
Then go to ld 96 and disable the dch as follows
.LD 96
REQ d DIS DCH xx
then go back to ld 60
disable the the PRI
****
ld 60
REQ DISL 8
ok
then enable
REQ ENLL 8
Hopefully as the PRI comes up it will bring the D-channel up with it.
Then go to ld 96 and disable the dch as follows
.LD 96
REQ d DIS DCH xx
then go back to ld 60
disable the the PRI
****
ld 60
REQ DISL 8
ok
then enable
REQ ENLL 8
Hopefully as the PRI comes up it will bring the D-channel up with it.
- Status
Similar threads
- Locked
- Question
