Enable Logging "correctly"

[snootalope]

Cisco PIX software version 4.4 with Firewall Manager 4.3(2)c

I enabled logging via the Firewall Manager, at least I think I did, and put my email address in there under the sysvol info as well as my SMTP server.. I'm trying to test if it's working, but I can't see any logs anywhere, and I'm not receiving any email from it.. I've read the configuration documents from cisco but it's not working..

Everything in the firewall manager says it's enabled and set to either log or email.. Can someone point me in the right direction here??!? Maybe a little more clear of a document that can walk through doing it properly?

Thanks!

"tis better to remain silent and be thought of as a fool..
then open your mouth and remove all doubt" Mark Twain

"I should of been a doctor.." Me

 

[yizhar]

HI.

Try the command:
"show log"
Within a telnet session.

If you're hardware supports newer version, a good idea will be to upgrade the pix.

Checkout these links:

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_44/pix44em/index.htm

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_44/pix44em/index.htm

http://teachers.sivan.co.il/yizhar/files/pixlinks.htm

Yizhar Hurwitz

http://come.to/yizhar

http://teachers.sivan.co.il/yizhar

 

[snootalope]

Thanks man.. that's exactly what I did.. upgarded to 6.3.1!! WhooHoo!!

"tis better to remain silent and be thought of as a fool..
then open your mouth and remove all doubt" Mark Twain

"I should of been a doctor.." Me