Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations dencom on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Emulate loop start trunk with Definity analog single line port

Status
Not open for further replies.
Integrationman2

Integrationman2

Vendor
Mar 8, 2008
27
US
I am trying to "trunk" an IP Office with (4) analog single line ports from a Definity G3si. DIDs are assigned to each of the ports, and I can make a 2500 test correctly, but the IP Office does not recognize the calls like it does from a CO provided loop start line. Can I change the settings on my Definity's single line ports to emulate the CO provided line?
 
Status
Not open for further replies.

Similar threads

Samfiller
  • Locked
  • Question
Avaya Definity Platform Port Pin outs
Replies
3
Views
328
AvayaTier3
AvayaTier3
ack41
  • Locked
  • Question
Definity ECS R9.5 program card
Replies
3
Views
396
AvayaTier3
AvayaTier3
R
  • Locked
  • Question
G450 Analog-test command
Replies
0
Views
300
Red19
R
M
  • Question
Internal Trunk override sac/cf of station
Replies
0
Views
122
milske
M
M
  • Question
Call from internal trunk sac/cf override
Replies
0
Views
101
milske
M

Part and Inventory Search

Sponsor

Back
Top