Hello, I have been asked to look into the "Emergency Switch" facility on the MD110. I have searched all my documentation and can see that a SERV parameter has to be allowed. Could someone please explain what the feature is used for and how I programme it? I can then try and look professional whilst on site. The BC level will vary from BC9 to BC12. If you need more information just ask.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Emergency switch
- Thread starter Option43
- Start date
The operator can enable emergency mode normally via *90# (The Night time symbol will flash). Then only extensions with an ‘emergency allowed’ can make new calls. Non-emergency extensions can not make any calls… internal or external.
Regards
Isinor
Regards
Isinor
- Thread starter
- #3
- Status
Similar threads
