Emergency Notification in TSW

[pdfman2002]

Can anyone point me to right direction about Emergency notification feature please?Is this the same as Emergency switching (That is done by operator or i/o commands?
Thanks

 

[pdfman2002]

Using the emergency notification feature analog, digital, and IP phones are enabled to receive simultaneous emergency messages. For IP phones, emergency messages are displayed in the phone display, while analog and digital phones receives emergency information via sound sources connected to Music-on-Hold inputs of the TMU board. Emergency notification is executed by calling an emergency number (a generic extension) with an active personal number list. The personal number list includes two types of internal group hunting groups:•Empty internal group hunting groups configured for emergency notification. These groups are used for preparing extensions comprised by an emergency notification broadcast for the reception of an emergency notification. All extensions having the same customer number as the internal group hunting group will be prepared for reception of the notification.•Internal group hunting group with a member (a digital phone, referred to as the SDTS) configured for emergency notification. For installations using live voice messages (originating from the emer-gency number caller), the SDTS headset output is connected to a Music-on-Hold input of the TMU board.Using several emergency numbers (each number with it's own personal number list), emergency notifications can be broadcasted to a number of combination of groups.