embksrv.log

[kmcneil]

I am trying to find information on this log. It contains some errors that I have not seen in the Arcserve Manager view.

07:12:31 Start Emergency Backup [Server Mode]; Start date: 7/24/2002
07:12:31 Failed to OpenIPXSocket RC=10047.
07:12:31 Listen socket 1 failed RC=10038.
08:54:54 Start Emergency Backup [Server Mode]; Start date: 7/29/2002
08:54:55 Failed to OpenIPXSocket RC=10047.
08:54:55 Listen socket 1 failed RC=10038.
09:58:04 Start Emergency Backup [Server Mode]; Start date: 7/29/2002
09:58:04 Failed to OpenIPXSocket RC=10047.
09:58:04 Listen socket 1 failed RC=10038.
10:31:13 Start Emergency Backup [Server Mode]; Start date: 7/29/2002
10:31:14 Failed to OpenIPXSocket RC=10047.
10:31:14 Listen socket 1 failed RC=10038.

Is there anyway I can find out where these problems are coming from. What is emergency backup?

I am using Arcserve 2000.

 

[davidmichel]

Emergency backup takes place when it is detected that there is a problem with the volume. A backup of that volume will automaticly be initiated. It is dependent on the OS, disk driver, and the hard disk for it to work.

In this case it could not take place due to network problems causing the winsock errors.