Embedded Voicemail Collect for HuntGroup

[maxdiorio]

Everything I've read says I can create a short code to voicemail connect to pick up a hunt group using the embedded voicemail.

I have

Code: *4486
Feature: Voicemail Collect
Telephone Number: "?Main"

I assigned the code *4486 to a button on the phone.
When the user presses the button, or dials *4486 directly, they get a fast busy and the display read incompatible.

Is this just a feature of VM Lite or Pro?

Thanks.

 

[amriddle01]

Change it to #4486 or *98 or something as it's conflicting with the relay pulse shortcode of *44.

ACS - IP Office Implement

 

[maxdiorio]

Thank you...worked like a charm. I figured that because it was a different code from *44 that there wouldn't be an issue, it would detect all 4 digits.

 

[IPOfficeIreland]

Why don't you use Visual Voice for collecting the hunt group messages? This way they will get LED indication of new messages.

You can either use a button or in 4.2 (which I think you are using) set the Message button to access VV.

Put HMain as source code under User Tab.