EM : PDG and Distribution list

[T8keiteasy]

I have an Entreprise Manager set up with Distribution list.
My sites are not clustered.

I would like to set up a cluster on order for users to be able to use BLF between sites and route calls from each sites using IP;

My IP tunks are not sized to make calls, Do I have utility to migrate to a cluster (neved did before) ?


Must a cluster use PDG (a unique directory) ?
What will DL becomes ?

Best regards

Now, it's about French users too !!!

 

[Lundah]

How many nodes and DN's are we talking about? Do you want to be able to dial each DN direct, or would you want to use PNI (node ID's) in front of remote DN's?

 

[T8keiteasy]

Hi

I have five nodes.
For the moment I use direct dial thru IP trunks, so no PNI in front of numbers
I'm interested on using BLF amoung sites.

Now, it's about French users too !!!

 

[Lundah]

Ok, well the first thing you need to do is go through each PBX and make sure you don't have any conflicts in the DN's between them. What I mean by this is any DN in the cluster must be unique. Easiest way to do this would be to export the Telephone Directory Assignment form from each PBX and look for entries with the same DN.

Clustering is easier if you use SDS (System Data Synchronization), so if you don't already have that enabled you'll want to get that going. Again, this means going through each system and making sure any data that you wish to share across the cluster doesn't conflict with data in another node.

Programming instructions for all of this will be in the documentation, take a look at the online help on the 3300, OpsManager, as well as the Engineering Guidelines & Tech Handbook for Enterprise Manager/OpsManager on the programming steps.