ELU33 and DBC 222

[nethell]

Hi all,

I have problem using ELU33 with DBC222 phones:
SFCEI, block/deblock is not helped.

<kscap:dir=223;KEY SYSTEM CATEGORY PRINT
DIR TRAF SERV CDIV ROC ITYPE TRM ADC LANG BSEC
223 00030301 0002120700 000151000 000001 26 0 00000000000000 F 0

END

<ksddp:dir=223;KEY SYSTEM DIRECTORY DATA
DIR CUST EQU CAT ADN ODN CALALT TIMER
223 001-0-50-01 3 1 0

END

<blfdp; FAULTY DEVICES
EQU BOARDID BLOCKING DISTMARK LINELOCK
001-0-50-01 117 B'0000000000010000 NO NO

END

Regards,
nethell

 

[kank]

I seems the problem is on your phone. Did you try to change the phone with another?

 

[nethell]

Hi

I tested with other phone same problem.
But on ELU28 phones are work.


BTW board revision is:
cnbip:bpos=1-0-50;
DEVICE BOARD REVISION INFORMATION
DATE: 04FEB09 TIME: 13:12:37

BPOS BOARD/BRDID PRODUCT NUMBER REVISION STATUS ADD
/IND

001-0-50 ELU33 ROF1375062/1 R2C
CAA 158 0032 R7C EXE Dig.ext. 32 ind.
CAA 112 2933 R2A FB ELU33/34 boot
CAA 112 2934 Mv3a FB FPGA



BR,
Nethell

 

[whosrdaddy]

can you show:

CADAP;
CNLIP:LIM=1,DEV=YES;

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[nethell]

Hi
cadap;CALENDAR DATA
IDENTITY=LIM1
VERSION=CXP1010139/4/TSWSP05/R6A
13:53:47
WED 04 FEB 2009
END

<cnlip:dev=yes;
LIM CONFIGURATION
LIM NUMBER 1
LIM CONTROL LIM CONTROL NUMBER OF SERVICE
SYSTEM SIDE SYSTEM STATE PCM-LINKS STATE LIM
A EXECUTING 0 ACTIVE
B NOT EQUIPPED
MEMORY MEMORY MEMORY SPARE
VOLUME SPARE AFTER PACKING
65535 KB 8833 KB 8833 KB
BUAR1 4658 KB BUAR2 3626 KB

DEVICE BOARDS
NUMBER OF
BPOS BOARDID INDIVIDUALS SERVICE STATE
001-0-00 119 32 ACTIVE
001-0-10 102 32 ACTIVE
001-0-20 77 16 ACTIVE
001-0-22 77 16 ACTIVE
001-0-30 87 16 ACTIVE
001-0-32 NOT EQUIPPED
001-0-33 NOT EQUIPPED
001-0-40 NOT EQUIPPED
001-0-41 NOT EQUIPPED
001-0-42 NOT EQUIPPED
001-0-43 NOT EQUIPPED
001-0-50 117 32 ACTIVE
001-0-60 106 8 ACTIVE
001-0-61 NOT EQUIPPED
001-0-62 76 8 ACTIVE
001-0-63 NOT EQUIPPED
001-0-70 42 32 ACTIVE

 

[slash50]

Have you restarted the board?

 

[nethell]

Hi

Yes of course I restarted board with SOFT and HARD reset.
Did not help.

BR,
Nethell

 

[slash50]

It could be a faulty port on the card, I have had several on ELU28 but none so far on ELU33.

 

[nethell]

Hi

I have two ELU33, both with same error.
Very strange

BR,
Nethell

 

[slash50]

have you deleted the extension on that port and reinitiated it?

 

[nethell]

Hi

Yes I did.
one thing more when I create extention with ksexi on ELU 33 it took litle bit more time than creation extention on ELU28

BR,
Nethell

 

[slash50]

Right, so it's not the handset, it's not the port or the card, it's not the programming....

Maybe there is some interference along the cabling? Loose connection in patch panel? I'm clutching at straws here, sorry...

 

[kank]

rfexi

 

[Satellite1900]

Hi,
Try to attach a phone to a cable cut on the pair that does not work, could be the 'attack HW

 

[nethell]

Hi

RFEXI does not help.
Phone diectly attached to cable without patch panel.