ELU32

[mdman1]

HI I HAVE GOT AN OLD ELU32 BOARD

001-0-22 ELU32 ROF1375428/1 R1A
CAA 158 0016 R9A EXE
I FOUND THIS HERE ON THE FORUM

is the hardware version of the ELU32 lower than R6A??
if this is the case, you need to order a special cable from E/// with a firmware specific for the FPGA chip.
otherwise you just need to update the ELU32 firmware via the MD110.
normally this is work for your service provider...

MY QUESTION IS WHAT IS THE ORDER NUMBER FOR THIS CABLE OR IS THERE SOMONE HO HAS THE WIRING? WHAT FW TO USE?

 

[whosrdaddy]

your board needs to be R5A (HW rev) to do this procedure.

all lower revisions can't be used for voip, use it for DTMF32 function.

//Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[mdman1]

ok so what you mean as for IPEXTENSION&TRUNK this card is no good what is DTMF32 function i guess its for some reciving of dtmf but what is it exactly i wanted to use the card for ipextension what do you recomend should i get another used card with the higher revision or what it is for use on a labb system that i have private just for fun conected with business phone systems etc so its only for my use no custumers or business operating on it will this make any difference or is it to old card that shuld belong in museum?

 

[whosrdaddy]

you can use the card for lab use. DTMF32 function is used for mobile extension (SPU4 = ELU32)

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!