elu 31 sync cable 1

[tuffe]

Hi I use old cabinet and sync my elu31 board. Is there any one who have a good schematic how to connect different borads and lims???

u

 

[kank]

what are your cabinets lbp16, lbp20, older?

 

[tuffe]

It's lbp16, no internal sync connection.

3 Elu31 in first lim and 3 in the 2 lim.

U

 

[kank]

1) From TX of first ELU31 of LIM1 connect to RX of second ELU31 of LIM1 with TSR 9011225/400.
2) From TX of second ELU31 of LIM1 connect to RX of third ELU31 of LIM1 with TSR 9011225/400.
3) Terminate TX of the third ELU31 in LIM1 with RNV 991 301 plug.
4) From TX of first ELU31 of LIM2 connect to RX of second ELU31 of LIM2 with TSR 9011225/400.
5) From TX of second ELU31 of LIM2 connect to RX of third ELU31 of LIM2 with TSR 9011225/400.
6) Terminate TX of the third ELU31 in LIM2 with RNV 991 301 plug.
7) Remove the top of connector you pluged on TX of the first ELU31 board of both LIM1 and LIM2.
8) From TX of first ELU31 of LIM1 connect to the RX of the first ELU31 of LIM2 with 1/TSR 901 1219 or TSR 901 1223.
9) From TX of first ELU31 of LIM2 connect to the RX of the first ELU31 of LIM1 with 1/TSR 901 1219 or TSR 901 1223.

 

[tuffe]

Thanks... very good.
I will connect it ASAP.

Thanks again
U