Elite programming

[Targis55]

I have just inherited an Elite IPK. I have a manual but am still a Norstar guy. The teminology is what hangs me up. Basically I dont know what feature does what. My biggest problem at the moment is making the main phone of a hotel answerable at 3 other phones, so if it rings the others ring too. Onviously incoming lines ring but incoming extensions do not. I think on the Norstar I program a DND button on each phone fpr the main phone. Can anyone tell me what its called here or even better would be the codes...

Thanks Mike

 

[belevedere]

Here it's called an SIE (call appearance) key (secondary incoming extension). You first need to find out what the port number is of the main phone. Press FNC (feature) + 4 at the main phone in the idle condition. The LCD should show the port and extension number. Next, go into the program mode (HOLD+#+0+*+8974). You need to place the SIE (port number of main phone) on a button of the other phones.
CMD 4-12, by telephone port, LXX (button number), LK 5 + SIE number of extension you want to appear.
EX: main tel port is 01. Ext 102 is port 02
CMD 4-12-L01 in the far left of the LCD is the port number.
EX: 01 - 4 - 12 - L01. Press CNF to advance to tel port 02
02 - 4 - 12 - L01, press LK 5 type 01, press TRF to write it. Main Tel port now appears on LK 01 of Tel port 02.
Ring assignment is similar in CMD 4 - 37 = day, 38 = night.
The TRF key writes data and advances to the next CMD not the next port. Use * + # keys to move cursor left or right.