Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Elite 48 port expansion

Status
Not open for further replies.

rosiej

Programmer
Jan 10, 2009
33
Someone said they believe the Elite 48 (B48-U10 cabinet) capacity could be expanded. I find nothing in documentation to support this. I have aystem that is less than 48 ports but the only slot left is S7; need to add another ESI8. Can I do anything with this or do I need to go to the IPK?
 
the elite 48 cannot be expanded. If you can get your hands on an elite 192 CPU and an EXP card then you can add an additional cabinet. I would not recommend going to the IPK since it is no longer supported. SV8100 is the next logical solution.

"However beautiful the strategy, you should occasionally look at the results." Sir Winston Churchill
 
you can re-use your cards in a 192, IPK, or IPK II chassis (B64)and then use the SV8100 upgrade kit.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top