We had our elevator renovated and the elevator guy is telling me that he only sees 18V for the analog line going into the elevator. I have yet to test it with a volt meter, but is there a setting in the G3si to alter the voltage of an analog port? He says it has to be 48 volts.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Elevator Phone
- Thread starter rtetryyt
- Start date
- Status
Similar threads
- Locked
- Question