Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Electra Pro II - two-way speakerphone? 2

Status
Not open for further replies.

Hewcrew5

Technical User
Sep 1, 2010
21
Looking to activate hands-free speakerphone. Mic currently on all phones do not work. Able to activate MIC, but not use hands-free.
 
Try command 15-02-16 = handsfree operation for outside calls, by station. Set it to a 1 to enable. 1 was the default value.
 
Go into memory block 4-29 and press line 2 and transfer to turn it on for each port.
 
I don't know the NEC programming. I have the manual, but I need to be clearer. I see where 4-29 is HFU, how would be program each port that needs HFU, by typing in the port number?
 
Program mode from any phone, HOLD, #, 0, *, 8974
Press line key 4, keypad 29. The number in the far left of the display is the telephone port number. Press line key 2 to turn on speakerphone, press TRF to write the change. This takes you to the next memory block. Use the * key to move the cursor left, # key to go right. Move back to the memory block number (where 29 was) in the display, then press CNF to advance to the next telephone port number. Repeat the process for all of the phones.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top