macphoneguy
IS-IT--Management
I have added two LS lines to a system however I don't believe the previous programming allowed anything but the orginal 2 lines, what option is it to turn it on ?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
electra 192 newbie question
- Thread starter macphoneguy
- Start date
- Status
NECPBXtech30
IS-IT--Management
MB 4-01 to assign day ringing and MB 4-12 to assign key data. If you had to add a card, then MB 7-01 for slot assignment. If you want to add them to a trunk group MB 3-03. I am not sure what exactly you want to turn on, but these are the commands for adding lines with line appearances on phones. There are also switch settings on the card for LS and GS. You may want to verify those as well.
- Thread starter
- #3
macphoneguy
IS-IT--Management
I think I have it down, one other question, that is with the pc software, I can hookup a PC directly to the KTU, however when I hookup up a external modem, using a DCE to DCE cable I can dial it and the external modem, answers the call, however I never get the connect
am missing something within the Modem configuration ?
am missing something within the Modem configuration ?
- Status
Similar threads
