Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Electing Root Bridge for STP

Status
Not open for further replies.
CPaul123

CPaul123

IS-IT--Management
Apr 18, 2002
94
0
0
US
I have 8 switches...which switch should i make the root bridge?
 
Sort by date Sort by votes
the one closest to the the gateway router?
 
Upvote 0 Downvote
If you have 8 switches, then you should have 7 switches that plug directly into 1 switch. Thus that one is your core switch.
 
Upvote 0 Downvote
Unfortunately thats not the case in my situation...I have six switches in one general area that are upliked off of one an other and 2 that are connected via a fiber uplink...
 
Upvote 0 Downvote
If you have 6 switches in the same area ... then you should elect one of them the main switch and plug the 5 other switches into that one. There should be no daisy chaining.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

jarod_paris
  • Locked
  • Question
firmware for an AP2800 WiFi terminal
Replies
0
Views
75
jarod_paris
jarod_paris
telepath
  • Locked
  • Question
Unexpected STP Topology Changes
Replies
0
Views
50
telepath
telepath
disk-us
  • Locked
  • Question
RTU licensing for a901
Replies
0
Views
35
disk-us
disk-us
Willi DB
  • Locked
  • Question
Polycom410 Forward an incoming call
Replies
0
Views
43
Willi DB
Willi DB
MoJHK
  • Locked
  • Question
UAT for Cisco C9200
Replies
0
Views
32
MoJHK
MoJHK

Part and Inventory Search

Sponsor

Back
Top