Elan to SCCS speed setting

[Telecomdog]

On an Option 81 (CS1000) ver 4.5 Elan to SCCS 5.0, should the speed be hard coded to 100 or 10? Why?

 

[lretrievers]

The servers can talk at 100; however the PBX can only talk at 10;

 

[Telecomdog]

Thanks lretrievers.

With regard to your statement on the PBX being set to 10, does it matter on the processor type? Motorola vs. P2's?
We recently upgraded to P2's. According to our vendor, P2's can be 10/100 ??? but the Moto's are only 10 ???. Thoughts?

 

[sandyml]

telcomdog is correct.

 

[mte0910]

All of my sites with P2's run at 100 full with no issues.
We set the speed on both the servers and the switches.

 

[Telecomdog]

Thanks to all of you for your input.