EIGRP on EasyVPN Client?

[TechJimF]

Have ASA 5510 at the head end as Easy VPN server, EIGRP working through the corporate network. Have ASA 5505 setup as Easy VPN client. Should/can we turn on EIGRP on the remote ASA 5505 on the outside interface, also turn on the outside interface (currently passive) of the ASA 5510 and setup rules as to what networks it EIGRP is broadcast to?

Any reasons for and against to use on the outside interfaces for both head end and remote?

Thanks in advance,

Jim

 

[Supergrrover]

Haven't tried it with eigrp -
take a look at this it's for OSPF but the steps should be the same just make it eigrp

http://www.cisco.com/en/US/products...s_configuration_example09186a00804acfea.shtml

This is the setup for eigrp

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008086ebd2.shtml

Brent
Systems Engineer / Consultant
CCNP, CCSP