EdgeRouter Lite at office and home 9608 up but no voice

[headcase69]

hey guys,

just wondering if anyone has set up an "IP" phone using the EdgeRouter Lite routers?

I have one at the office(that has a static IP address), and one at the house(behind a home(TDS)modem). I have a VPN connection up, and even a 9608 phone up "BUT NO VOICE"

I'm just hoping someone can give a little info/help on this as I CAN NOT get the voice to come over the 9608!?!?!?!?

here is a little bit of what monitor shows....

********** Warning: Logging to Screen Started **********
2362747612mS CMCallEvt: 0.8942.0 -1 BaseEP: NEW CMEndpoint f4e8fef0 TOTAL NOW=3 CALL_LIST=1
2362747612mS CMCallEvt: 0.8942.0 -1 test 125.-1: NEW CMExtnEndpoint f4e8fef0, Name=test 125, Extn=125, Phys Extn=125
2362747612mS CMCallEvt: CREATE CALL:1492 (f5687ce0)
2362747613mS CMCallEvt: 0.8943.0 -1 BaseEP: NEW CMEndpoint f4e61e10 TOTAL NOW=4 CALL_LIST=1
2362747615mS CMExtnEvt: test 125: CMExtnHandler::SetCurrent( id: 0->8942 )
2362747615mS CMExtnRx: v=125, p1=0
CMSetup
Line: type=IPLine 250 Call: lid=253 id=8942 in=0
Called[] Type=Default (100) Reason=CMDRdirect Calling[125] Type=Internal Plan=Default
BC: CMTC=Speech CMTM=Circuit CMTR=64 CMST=Default CMU1=ULaw
IE CMIECallingPartyName (110)(Type=CMNameDefault) name=test 125
IE CMIECallingPartyKName (226)(Type=CMNameDefault) name=test 125
IE CMIEFastStartInfoData (6) 12 item(s)
2362747616mS CMCallEvt: 253.8942.0 1492 test 125.0: StateChange: END=A CMCSIdle->CMCSDialInitiated
2362747616mS CMExtnEvt: v=4 State, new=Dialling old=Idle,0,0,test 125
2362747616mS CMTARGET: 253.8942.0 1492 test 125.0: LOOKUP CALL ROUTE: type=100 called_party= sub= calling=125 dir=out complete=0 ses=0
2362747617mS CMTARGET: 253.8942.0 1492 test 125.0: ADD TARGET (N): number= type=100 depth=1 nobar=1 setorig=1 ses=0
2362747617mS CMCallEvt: 253.8942.0 1492 test 125.0: StateChange: END=A CMCSDialInitiated->CMCSDialling
2362747620mS CMExtnTx: v=125, p1=0
CMFacility
Line: type=IPLine 250 Call: lid=253 id=8942 in=0
IE CMIEFastStartInfoData (6) 2 item(s)
IE CMIESecurityData (253) 2 item(s)
Timed: 18/02/16 15:02
2362747620mS CMExtnTx: v=125, p1=8002
CMFacility
Line: type=IPLine 250 Call: lid=253 id=4 in=1
IE CMIEFastStartInfoData (6) 2 item(s)
2362747621mS CMExtnTx: v=125, p1=0
CMSetupAck
Line: type=IPLine 250 Call: lid=253 id=8942 in=0
Timed: 18/02/16 15:02
2362747622mS CD: CALL: 253.8942.0 BState=Idle Cut=1 Music=3.0 Aend="test 125(125)" (0.0) Bend="" [] (0.0) CalledNum= () CallingNum=125 (test 125) Internal=1 Time=10 AState=DialInitiated
2362747624mS CMMap: PCG::AddToneGenerator g D1[1] for cp[710]b0r1 append pcp[711]b0r1 (total 1)
2362747624mS CMMap: PlatformConnectionAudioSAP::ConnectVoice pcp[711]b0r1 Configure 0.0
2362747624mS CMMap: PlatformConnectionAudioSAP::ConnectVoice pcp[711]b0r1 ConnectIndication 0.0
2362747624mS CMMap: a=0.0 b=0.0 pcp[710]b0r1 RTPD1
2362747638mS RES: Thu 18/2/2016 15:02:10 FreeMem=57549864(2) CMMsg=6 (7) Buff=5200 951 999 7463 5 Links=5659
2362747639mS RES2: IP 500 V2 8.0(43) Tasks=48 RTEngine=0 CMRTEngine=0 ExRTEngine=0 Timer=61 Poll=0 Ready=0 CMReady=0 CMQueue=0 VPNNQueue=0 Monitor=1 SSA=1 TCP=21 TAPI=0 ASC=1 SYS=MNTD OPT=UMNT SDSPD=2034
2362748618mS H323Evt: RTP(50t): 192.168.3.250/49152 192.168.20.43/51842 CODEC=Ulaw64K(5) PKTSZ=160 RFC2833=off AGE=995 SENT=50 (avg size=160) RECV=0 (avg size=0)
2362748622mS H323Evt: Recv: RegistrationRequest 69.21.138.11; Endpoints registered: 1; Endpoints in registration: 0
2362750021mS CMExtnTx: v=125, p1=8002
CMFacility
Line: type=IPLine 250 Call: lid=253 id=4 in=1
IE CMIEFastStartInfoData (6) 2 item(s)
2362750021mS CMExtnRx: v=125, p1=0
CMReleaseComp
Line: type=IPLine 250 Call: lid=253 id=8942 in=0
2362750021mS CMCallEvt: 253.8942.0 1492 test 125.0: StateChange: END=A CMCSDialling->CMCSCompleted
2362750022mS CMExtnEvt: v=4 State, new=PortRecoverDelay old=Dialling,0,0,test 125
2362750024mS CMExtnTx: v=125, p1=0
CMFacility
Line: type=IPLine 250 Call: lid=253 id=8942 in=0
IE CMIEFastStartInfoData (6) 2 item(s)
Timed: 18/02/16 15:02
2362750024mS CMLOGGING: CALL:2016/02/1815:02,00:00:00,000,125,O,,,test125,,,1,,""n/a,0
2362750025mS CD: CALL: 253.8942.0 BState=Idle Cut=0 Music=0.0 Aend="test 125(125)" (0.0) Bend="" [] (0.0) CalledNum= () CallingNum=125 (test 125) Internal=1 Time=2413 AState=Idle
2362750025mS CD: CALL: 253.8942.0 Deleted
2362750025mS CMExtnEvt: test 125: CALL LOST (CMCauseNormal)
2362750025mS CMExtnEvt: test 125: Extn(125) Calling Party Number(125) Type(CMNTypeInternal)
2362750025mS CMExtnEvt: test 125: CMExtnHandler::SetCurrent( id: 8942->0 )
2362750026mS CMCallEvt: 253.8942.0 -1 test 125.-1: StateChange: END=X CMCSCompleted->CMCSDelete
2362750027mS CMCallEvt: 0.8943.0 -1 BaseEP: DELETE CMEndpoint f4e61e10 TOTAL NOW=3 CALL_LIST=1
2362750027mS CMCallEvt: END CALL:1492 (f5687ce0)
2362750028mS CMTARGET: 253.8942.0 -1 BaseEP: ~CMTargetHandler f4e60764 ep f4e8fef0
2362750028mS CMCallEvt: 253.8942.0 -1 BaseEP: DELETE CMEndpoint f4e8fef0 TOTAL NOW=2 CALL_LIST=1
2362750030mS CMMap: a=0.0 b=0.0 pcp[710]b0r1 RTPD0
2362750030mS H323Evt: RTP(END): 192.168.3.250/49152 192.168.20.43/51842 CODEC=Ulaw64K(5) PKTSZ=160 RFC2833=off AGE=2407 SENT=120 RECV=0 RTdelay=0 jitter=0 loss=0 remotejitter=0 remoteloss=0
2362752027mS CMExtnEvt: test 125: Recover Timer reason=CMTRWrapUp
2362752027mS CMExtnEvt: v=4 State, new=Idle old=PortRecoverDelay,0,0,test 125
2362752027mS CMExtnTx: v=125, p1=0
CMVoiceMailStatus
Line: type=IPLine 250 Call: lid=0 id=-1 in=0
Called[test 125 Msgs=0 Old=0 Sav=0] Type=Default (100) Reason=CMDRdirect Calling[00000000] Type=Default Plan=Default
Display [test 125 Msgs=0]
Timed: 18/02/16 15:02

********** SysMonitor v10.0 (44) [connected to 192.168.3.250 (AutoCollision 1)] **********
2362765602mS PRN: Monitor Status IP 500 V2 8.0(43)
2362765603mS PRN: LAW=U PRI=0, BRI=0, ALOG=4, ADSL=0 VCOMP=42, MDM=0, WAN=0, MODU=0 LANM=0 CkSRC=0 VMAIL=1(VER=2 TYP=3) CALLS=1(TOT=1492)

********** Warning: Logging to Screen Stopped **********


ANY help would be greatly appreciated!!

thanks!

 

[amriddle01]

Turn direct media path off for the IP extns

 

[headcase69]

I did.... It still have the same problem???? I get the display to come up, I can ring/call anyone (both internal and outside), connect, but no voice? I think/hope it's just a firewall problem.... I wish I knew more about the Ubiquiti EdgeRouter!

Sorry for the stupid questions..... I know this problem may not get many replies as it's a firewall issue (I think), but just thought/wished someone had the same issue and figured it out!

Anyhow... Thanks for looking and any help would be great!!