Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Edd clr is remove everything
- Thread starter Jimmy9118
- Start date
it does not. If it doing that in your system, something is horribly wrong with the database, but it should not erase anything. Is the .edd command along, not working?
John Anaya
Amdocs Inc.
ACSS/ACIS - CS1000 Rls 7.5/Call Pilot 5
ACSS/ACIS - SME - IP Office 8.0
APSS/APDS - Avaya UC Services
Public Profile
John Anaya
Amdocs Inc.
ACSS/ACIS - CS1000 Rls 7.5/Call Pilot 5
ACSS/ACIS - SME - IP Office 8.0
APSS/APDS - Avaya UC Services
Public Profile
if you run an edd an get an error flagged up but are quite sure there is no issue and that you have adequate backup(s) to restore if needs be, then edd clr will clear the error flag and perform a backup. Obviously if this was flagging a corruption you are writing it to disk hence making sure you have whats needed to restore in case of an issue.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
