Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

EC500 Caller-ID

Status
Not open for further replies.

iggy1952

IS-IT--Management
Feb 2, 2006
172
US
We have a user set up with EC500 on an office phone which is programmed to send out the main office telephone number in the public unknown numbering table mapped to the outbound trunk group. When the user's office number is dialed and routes to her cell phone sometimes the caller-ID of the calling party is displayed on her cell phone instead of the office number. The calling party dialed from a Xfinity landline to the office number which routed via EC500 to the users Verizon cell number.

It was my understanding that EC500 never sends the originating calling party number.

Running CM 7.1.3 with the off-pbx configuration set calling number style as network. Our service provider is AT&T on an IP Flex BVoIP circuit.

iggy1952
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top