Hi
I'm using Arcserve 2000 on our two W2k DCs. Last week we had some major network problems and we attempted to restore the system State Data from our DLT tapes. We are using a Dell Powervault 110T external DLT drive on each server.
On each server the restore failed, but more worryingly, both backup units appeared to have developed a problem. In each case Arcsserve can no longer see any media in the drives. When I checked the logs I got the error:
EC 6084 Drive hardware error - servo or sensor.
I'm sceptical about this being a hardware error, since the fault occurred at the same time on different drives on different servers during the same operation. Has anyone else experienced this problem?
I'm using Arcserve 2000 on our two W2k DCs. Last week we had some major network problems and we attempted to restore the system State Data from our DLT tapes. We are using a Dell Powervault 110T external DLT drive on each server.
On each server the restore failed, but more worryingly, both backup units appeared to have developed a problem. In each case Arcsserve can no longer see any media in the drives. When I checked the logs I got the error:
EC 6084 Drive hardware error - servo or sensor.
I'm sceptical about this being a hardware error, since the fault occurred at the same time on different drives on different servers during the same operation. Has anyone else experienced this problem?