Easy Vpn - ASA 5510 and Router 877

[levis72]

Hi,
I have to create a vpn beetwen a headquarter (site A) and a remote office (site B).

Site A has a public static Ip but not site B.

Anyone could give to me the configuration for this case?

Thanks in advance.
Levis

 

[Supergrrover]

Just what the Dr ordered -

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080809222.shtml

Brent
Systems Engineer / Consultant
CCNP, CCSP

 

[levis72]

Hi,
I saw that exaple but it doesn't work!

I want a vpn l2l and not remote access.
Moreover, how can i manage this
xauth userid mode interactive
in clent router?
Users haven't to authenticate but only the router.
Thanks in advance.


Levis

 

[Supergrrover]

If you want a L2L then you need 2 static ips at the ends. If you don't have a static ip on both ends then you must use it as an easy vpn server. No way around it.

Once you do this on the router one time -
crypto ipsec client ezvpn xauth

and enter the username and password, you are all set up.



Brent
Systems Engineer / Consultant
CCNP, CCSP

 

[levis72]

Hi,
I want to use easy vpn tecnology.
Well, i have a static ip address in site A but not in site B.
Moreover, i want to configure asa 5510 in site A as vpn server
and router 877 in site B as peer client (easy vpn remote)
Users behind router don't have to authenticate, only the router has to create the tunnel.

Thanks in advance.

Levis.