thepallace
Technical User
I ran a post-data to capture diagnostic log on SUN E4800 without bringing the system on the OK promt. I did a send brk to bring it to console terminal. I did "setkeyswitch off" and I "setkeyswitch on" to power on and server came backup up. When I did a psrinfo and only shows one CPU is online. I did reboot and system came backup up again showing all 6 CPU's. Is anyone know the reason why? Do I really need to bring the system on the OK prompt before doing the post-data again. Pls advise.
sat-console1:A> setkeyswitch off
Powering boards off ...
sat-console1:A>
sat-console1:A> showkeyswitch
keyswitch is: off
sat-console1:A> showkeyswitch on
No arguments expected
Usage: showkeyswitch [-v]
showkeyswitch -h
sat-console1:A> setkeyswitch on
Powering boards on ...
Testing CPU Boards ...
{/N0/SB2/P2} Running CPU POR and Set Clocks
{/N0/SB2/P3} Running CPU POR and Set Clocks
{/N0/SB2/P2} @(#) lpost 5.13.3 2002/09/04 14:57
{/N0/SB2/P3} @(#) lpost 5.13.3 2002/09/04 14:57
{/N0/SB2/P2} Copyright 2001 Sun Microsystems, Inc. All rights
reserved.
{/N0/SB2/P2} Subtest: Setting Fireplane Config Registers for aid 0xa
{/N0/SB2/P2} Subtest: Display CPU Version, frequency
{/N0/SB2/P2} Version register = 003e0015.22000507
-----------/var/adm/messages----------
Jun 23 11:02:33 saturn-w2-db12 unix: [ID 597027 kern.warning] WARNING:
status 'fail' for '/ssm@0,0/SUNW,UltraSPARC-III+@1,0'
Jun 23 11:02:33 saturn-w2-db12 unix: [ID 597027 kern.warning] WARNING:
status 'fail' for '/ssm@0,0/SUNW,UltraSPARC-III+@2,0'
Jun 23 11:02:33 saturn-w2-db12 unix: [ID 597027 kern.warning] WARNING:
status 'fail' for '/ssm@0,0/SUNW,UltraSPARC-III+@3,0'
Jun 23 11:02:33 saturn-w2-db12 unix: [ID 597027 kern.warning] WARNING:
status 'fail' for '/ssm@0,0/SUNW,UltraSPARC-III+@a,0'
Jun 23 11:02:33 saturn-w2-db12 unix: [ID 597027 kern.warning] WARNING:
status 'fail' for '/ssm@0,0/SUNW,UltraSPARC-III+@b,0'
Thanks in Advance,
jaq
sat-console1:A> setkeyswitch off
Powering boards off ...
sat-console1:A>
sat-console1:A> showkeyswitch
keyswitch is: off
sat-console1:A> showkeyswitch on
No arguments expected
Usage: showkeyswitch [-v]
showkeyswitch -h
sat-console1:A> setkeyswitch on
Powering boards on ...
Testing CPU Boards ...
{/N0/SB2/P2} Running CPU POR and Set Clocks
{/N0/SB2/P3} Running CPU POR and Set Clocks
{/N0/SB2/P2} @(#) lpost 5.13.3 2002/09/04 14:57
{/N0/SB2/P3} @(#) lpost 5.13.3 2002/09/04 14:57
{/N0/SB2/P2} Copyright 2001 Sun Microsystems, Inc. All rights
reserved.
{/N0/SB2/P2} Subtest: Setting Fireplane Config Registers for aid 0xa
{/N0/SB2/P2} Subtest: Display CPU Version, frequency
{/N0/SB2/P2} Version register = 003e0015.22000507
-----------/var/adm/messages----------
Jun 23 11:02:33 saturn-w2-db12 unix: [ID 597027 kern.warning] WARNING:
status 'fail' for '/ssm@0,0/SUNW,UltraSPARC-III+@1,0'
Jun 23 11:02:33 saturn-w2-db12 unix: [ID 597027 kern.warning] WARNING:
status 'fail' for '/ssm@0,0/SUNW,UltraSPARC-III+@2,0'
Jun 23 11:02:33 saturn-w2-db12 unix: [ID 597027 kern.warning] WARNING:
status 'fail' for '/ssm@0,0/SUNW,UltraSPARC-III+@3,0'
Jun 23 11:02:33 saturn-w2-db12 unix: [ID 597027 kern.warning] WARNING:
status 'fail' for '/ssm@0,0/SUNW,UltraSPARC-III+@a,0'
Jun 23 11:02:33 saturn-w2-db12 unix: [ID 597027 kern.warning] WARNING:
status 'fail' for '/ssm@0,0/SUNW,UltraSPARC-III+@b,0'
Thanks in Advance,
jaq