Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

E2T debbug cable 2

Status
Not open for further replies.

mdrivera

IS-IT--Management
Jun 8, 2006
4
MX
Somebody has the configuration of debug cable. It is the cable to program the E2T. The debug (Tapi) cable is an RS-232 serial cable with a PS2 connector at one end and a DB9 connector at the other.

 
go to the threads page for the mitel forum (just click "back") and click on the lightbulb. This will sort the threads with the TIPS first. Scroll down and you will see two threads regarding the E2T. One is how to build one and the other is how to use the secure telnet method.

Good luck.



**************************************
My Biggest problem is that I almost always believe what I tell myself.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top