Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

E1 trunk DID to specific extension numbers

Status
Not open for further replies.

conquer2006

Technical User
Apr 3, 2013
117
NG
I have a E1 trunk line Pilot 280010 with a range (2800100-599) and was setup to route through auto attendant before reaching the operators. However my client want DID for this two extensions. 2800110 to land on extension 6804 and 2800111 to land on 6140.
Please how do I achieve this send task while the first remain the same.
 
I have a E1 trunk line Pilot 2800100 with a range (2800100-599) and was setup to route through auto attendant before reaching the operators. However my client want DID for this two extensions. 2800110 to land on extension 6804 and 2800111 to land on 6140.
Please how do I achieve this send task while the first remain the same
 
All calls still goes to the Operators, even the two numbers 2800110 and 2800111( This is with MITEL 3300 MXe III Controller)
 
What does the trunk attrbute i.e. trunbk service assignment look like for this?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top