E1 Line on KX-NS500

[DenisTz]

Hi
I have E1 on kx-ns500 its working fine.E1 subscriber give out 10 numbers batch
I have set different number to different extension number different number from e1 batch can ring to its location without problems.
My problems is on outgoing call its only goes out by only one number(pilot number) ,is anyone help me to set up this

Example:-
1.extension 101 his direct number 2379101 (for incoming and outgoing)
2. Extension 102. His direct number 2379102(for incoming and outgoing)
NBilot number 2379100
Etc

 

[omonat]

Have you set the outbound caller ID for each extension?

 

[DenisTz]

Outbound ID I have not set ,I don't know how to set
I need each extension to have different outbound ID same as I did inbound destination

 

[obtsystems]

Under extension settings clip ID

 

[DenisTz]

I did it but still the same problem

 

[omonat]

How many digits is your operator expecting you to send?.

Ask your E1 Line provider.