E1 ISDN-PRI Definity - Hipath 4K

[LamThanh]

In the Definity pabx, I only have TN464 card, don't have TN778 or TN765. So, can i establish E1 ISDN-PRI trunk with Hipath 4K. Thanks.

 

[AvayaTier3]

What is your processor for your Definity?
What is your Definity software version?
Command: list configuration control
Command: list configuration software
Command: display system-parameters customer-options (ISDN-PRI? y)

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

45 years Bell, AT&T, Lucent, Avaya
Tier 3 for 35 years and counting
[URL unfurl="true"]http://bshtele.com[/url]

 

[LamThanh]

Hi AvayaTier3,
Today is Sunday, so i can't login to show command. But i have a picture of the Definity.
Processor: TN786B
Software version: G3V41.01.0
About ISDN-PRI = yes, i will check later.

 

[AvayaTier3]

This is very old system (circa 1995)
It appears to be duplicated SPE with at least two stackable cabinets.
For ISDN you would need to add tn765 Processor Interface to each SPE-A and SPE-B cabinet or add two tn778 Packet Control circuit packs to each SPE.
ISDN would need to be set to y
ISDN-PRI over PACCON would need to be set to y if you use tn778 instead of tn765

display system-parameters customer-options
                                    OPTIONS


                              Hospitality (Basic)? y
                         Hospitality Enhancements? y
                                        [COLOR=#EF2929] [b]ISDN-PRI? n
                             ISDN-PRI over PACCON? n[/b][/color]

                      Terminal Trans. Init. (TTI)? n

                                              ACD? y
                                     BCMS (Basic)? y

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

45 years Bell, AT&T, Lucent, Avaya
Tier 3 for 35 years and counting
[URL unfurl="true"]http://bshtele.com[/url]

 

[LamThanh]

Hi AvayaTier3,

Thank you very much