E1 interface Using NSU

[conquer2006]

I Client have an old system Mitel MXe with NSU as E1 interface with an Ericsson Minilink CN 210 from A service Provider.
After the configuration of the NSU, and programming of the E1 port, the Lo light is flashing green, and not steady.
I need assistance from you Guys.

The E1 link provider sent this to me and I don't understand it.

Below are parameters we used.

Importantly customer should use STANDARD FORMAT and not CRC4.





PDCLNK LN- ALACOU ALASYM REAC RELTIM

LTG : PDCID CODE FORMAT ESFEOC : : ECD INIT: EBIT ACTTIM:

------+-+-------------+----+------+------+-+---+-----+--+--+---+---+---

0-12 0 HDB3 STDFRM 2 NO NOECD 7 8 NO 2 20



END JOB 3547 EXEC'D





LAC = 084 DN = 465700 MASKNO:03793

OPTRCL = 7 MASKNO:03798

COS = SUBNO DDI STIPROT FCTPROT MASKNO:03777

TLIM = CLEATM1 DIALTM1 RINGTM1 MASKNO:03802

ADDINF = TRAFMEA MASKNO:03772

SERV = CMSPEECH MASKNO:03797

COS = CLIP MASKNO:03777

SERV = CMUNRST MASKNO:03797

COS = CLIP MASKNO:03777

SERV = CMAUDIO MASKNO:03797

COS = CLIP MASKNO:03777

SERV = CMAUDI7K MASKNO:03797

COS = CLIP MASKNO:03777

SERV = TEL3K MASKNO:03797

COS = CLIP MASKNO:03777

SERV = TEL7K MASKNO:03797

COS = CLIP MASKNO:03777

SERV = FAX4 MASKNO:03797

COS = CLIP MASKNO:03777

SERV = TTX64K MASKNO:03797

COS = CLIP MASKNO:03777

SERV = VIDEOTEX MASKNO:03797

COS = CLIP MASKNO:03777

SERV = VIDEOTEL MASKNO:03797

COS = CLIP MASKNO:03777

SERV = NONVCGRP MASKNO:03797

COS = CLIP MASKNO:03777

SERV = ALLGRP MASKNO:03797

COS = CLIP MASKNO:03777

OPMODE = IOG MASKNO:03792

HUNT = NONSEQ MASKNO:03783

OPMODE = IBW MASKNO:03792

HUNT = SEQSRCH MASKNO:03783

END JOB 3548 EXEC'D

 

[conquer2006]

Hello Guys , please who can help me out or have worked with Ericsson Minilink CN 21 with Mitel 3300 E1