Scenario:
A CP PIV system running Rel 4.5 . CP 0 is OK, however I have a problem with CP 1 going into a disabled state. When you access CP 1 via J25, you get the indication that the "e-drive" is not accessable.
When you have a look into CP 0 there is in fact an e-drive. It seems to be used for temporary purposes, but also essential.
So, I have reloaded CP 1, and synced and joined OK. For a few days at least, then failed again.
Currently am waiting for a replacement CP PIV and FMD flash.
In the mean time though, have any others heard of a similar issue, and give a feed back on if my current thought process is correct.
Thanx
A CP PIV system running Rel 4.5 . CP 0 is OK, however I have a problem with CP 1 going into a disabled state. When you access CP 1 via J25, you get the indication that the "e-drive" is not accessable.
When you have a look into CP 0 there is in fact an e-drive. It seems to be used for temporary purposes, but also essential.
So, I have reloaded CP 1, and synced and joined OK. For a few days at least, then failed again.
Currently am waiting for a replacement CP PIV and FMD flash.
In the mean time though, have any others heard of a similar issue, and give a feed back on if my current thought process is correct.
Thanx
