E&M Trunk hipath 3800 (or X8) to hipath 4000 (or OS 4000) 1

[hamidreza sharifi]

Hi all,

I would like to perform a trunk E&M (via PLC - power line carrier) trunk between a hipath 3800 to a openscape 4000 V7.
and I inserted the following configuration on OS4k:

ADD-WABE:777,,,TIE,N,,,,,,,,;
ADD-HOTLN:HOTDEST,1,777,NONE;
ADD-BUEND:300,"SCC ",2,2,2,2,ON,0,0,NEUTRAL;
ADD-TACSU:1-1-37-0,,31,31,0,15,10,1,1,,300,0,"777 ",0,,0,1,EMPTY,0,NONE,NONE,0,EC&G729A," ",0,GDTR,0,,Y,TC,EMCONT2,0,,0,0,1,27,1,0,DIP-DIP,0-0,0,;
ADD-RICHT:LRTENEW,300,VCE,,300,1-1-100,,,,,,,,,,,YES,NO,,0,,NO,NO,NO,NO,NO,NO,NO,NO;
ADD-LDAT:300,VCE,1,,300,12,10,,1,EMPTY,WCHREG,,4,,,,,,,,,,,,;
ADD-LODR:12,,,,ECHO,2;
ADD-LODR:12,,,,END;
ADD-LDPLN:LCRPATT,0,777,,300,,,10,,,,N;

I found and read this link but I didn't find any hint for configuration on Hipath 3800 and also nothing about lwpar and ptime , Ctime and so on a complete sample may help me so much.

https://www.tek-tips.com/viewthread.cfm?qid=1736248

Best Regards
Hamid

 

[sbcsu]

Can you copy the configuration that you have found in the link that you provided ?

If both systems are to be integrated then both systems need to know the extension numbers of the other system as a beginning

 

[hamidreza sharifi]

Dear SBCSU

your Comment was so good and I got the Answer.

I had to grant subscriber access the trunk and also each side had to know other sides numbers.

Regards
Hamid