E&M PRI Module for connection to Cisco Box For VoIP

[wjonline]

Hi

I have a Nortel Meridian System
and have been looking at away to slowly migrate to VoIP
now from the Cisco boxes they say you can use a E1 PRI line that supports E&M or other moethod of signaling.

I understand that there is an E&M Module for this PBX.
Does anybody know what module this would be or has anybody done this before

thanks

 

[PERRYPJ]

I'VE DONE BOTH COPPER AND T1 INTO A CISCO, JUST DEPENDS ON THE INTERFACE IN THE CISCO

OLD ROLMEN WORKING ON NORTELS

 

[wjonline]

Well I was looking at a digital E1 module as I need at least 20 lines.

What would you recommend?

 

[dblade92]

I've got the same scenario, we found that using a NTAK09 1.5 PRI/T1 card worked nicely. It's allowed us to configure 23 channels (still working on the Dch version of the setup for call info) IAO without any trouble. PILES of PDFs on the cisco site to assist with some of the setup, or a local IT company or Interconnect should be able to assit.