telcomwork
Technical User
Wanted to send out a quick issue I ran into tonight. If anyone is using a DWL-900AP+ from D-Link, use caution upgrading the firmware. I am using a Cisco 350 Aironet Card along with this AP. Everything was working great until I updated the firmware to v2.5. After the update the Cisco Aironet could not associate with the AP. I check and doubled checked everything associated with the PC Card, Config and AP, but could not get it back. The status and error signals pointed to the card was not associated with an AP. SSID, channels, WEP keys, protocols....etc were checked but to no avail. I found the original firmware on D-Link's site and re-loaded it, and just like that the card re-associated with the AP. The only conclusion I can come up with is the Firmware is suspect. Just an FYI in case I can save someone some trouble.