Duplicated GS

[fouesnant]

Hello all

have a MD110 system with duplicated GS GBP10
In GS there is only 31 PCM line position (from 0 to 30).
So the last GJUG5 support only 3 PCM line.
but is it possible to do a duplication over one PCM line on the last positions (30-31), ie initate the G3 function?

 

[gcdhnjgfhfgsxh]

quick answer - no fraid not

 

[patcher]

Remember Duplicated GS means you have 2 identical group switch, GSSIDE=0 & 1. This means you cannot just duplicate a single GJUL. The best you can do is to initiate another GJUL4 and use a spare GSMULT.