DUMP PROBLEM

[emags]

I have 3 Lims connected through a GS. 2 lims are located at the same place. For about 3 week ia heve been experiencing erros in Lim 2 not dumping. Below is what i get when trying to dump. aNY Help pls.

location PERIODICAL SYSTEM DUMP HAS FAILED
DATE TIME ALP NOIF INF1
24MAR09 00:06:10 19 1 256

93 DUMP TO LOCAL BACKUP HAS FAILED
DATE TIME ALP NOIF EQU INF1
24MAR09 00:07:56 20 1 002-*-**-** 106

<DUBDP;
BACKUP DATA
EXTERNAL BACKUP LATEST PREVIOUS
REL2 REL1
09:30 12MAR09 00:01 10MAR09
LOCAL BACKUP
DIVERGENT TIME AND DATE LIM 1 09:30 12MAR09 08:24 24MAR09
2 09:30 12MAR09 FAULTY
3 09:30 12MAR09 08:24 24MAR09

 

[slash50]

Which version of software is this?

Have you tried doing a DUSYI to see what the result print is? That always gives you more information.

I have had two systems (BC8 and BC9) that had this problem. I rectified it by inputting the HDU again:

(from memory so some syntax may be incorrect)

BLEQI:EQU=1-0-XX-0;
FIMOE:SUBFS=SYSSUBFS11;
FIMOE:SUBFS=SYSSUBFS21;
IOSIE:NODE=SYSN,IODEV=SYSDISK1;
IOSII:NODE=SYSN,IODEV=SYSDISK1,EQU=1-0-XX-0,SIPOS=3,SUBFS=SYSSUBFS11&SYSSUBFS21;
FIMOI:SUBFS=SYSSUBFS11;
FIMOI:SUBFS=SYSSUBFS21;

Otherwise you could have faulty disk/flash card. Have you checked HIEDP/HIMDP?

 

[parnum]

Check the NIU, you are receiving timeout from LPU, so try pulling/swapping card.

If you try manual DUSYI, is command accepted> If it is not try restart of DRDH&DRDM.

Could also be link to lim 2 disturbance causing LPU timeout...

best parnum