Dump a RAID0 and restore on RAID1 ?

[Mckittrick]

As you guess, I need to convert the RAID 0 array in RAID 1 without reinstall and reconfigure.

I currently have a ProLiant 320 GL2 with 2 HD (80Go) in RAID0. Is it possible to make an image of the partition 160 Go with Ghost and restore later on the same server once the disk are reconfigured in RAID1. (Yes, less than 80 Go are in use on this partition, and I should be able to store the image somewhere on the network).

 

[FredUG]

Yes, if you can make the image with ghost you can restore it to a drive of a different size. Since all of the other hardware is the same it shouldn't need more than a reboot.

Good luck,

FredUG