Is it true that if a MICS 6.1 XC S/W, Dual PRI scenario, with all 46 channels as PRI-A, need both B-Channel Seq. set to Descending? Thought I might have read somewhere on 6.1 I&M CD. And that would make the first T clocking source Primary and the second Secondary. Thanks in advance...
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
DUAL PRI PROGRAMMING
- Thread starter BagsNYC
- Start date
Only need to make your B Channels Descending if the Carrier is sending them in an ascendind format. You do the opposite of them. Both T's are set to Primary and tell the carrier to overflow the first T to the second (this is pending on your inbound groups and if you want everything to come in like one big pool. Outbound you set the routes for the individual T's (i.e. 87 for the first 88 for the second .....) Remeber you are working with ESF provision your cards right and it matters how you order your PRI. Good Luck Hope This Helped.
- Status
Similar threads
- Locked
- Question
