Hi Guys,
We need to implement 2 3750 stack switches for an emergency purposes, I've have never configured switches in stack before, i was reading the Cisco guide but i can't find what i need to know, those switches are new, never been configured, OK here is my question:
We will have one Master and one Slave, when i configure the switch do i have to do it in the Master switch only ??, meaning, i configure the Master and then the Slave will take that same configuration from the Master?, will the only difference be the Interface number EX: Master 1/0/1 - Slave 2/0/1, is this all correct?
Thanks in advance.
We need to implement 2 3750 stack switches for an emergency purposes, I've have never configured switches in stack before, i was reading the Cisco guide but i can't find what i need to know, those switches are new, never been configured, OK here is my question:
We will have one Master and one Slave, when i configure the switch do i have to do it in the Master switch only ??, meaning, i configure the Master and then the Slave will take that same configuration from the Master?, will the only difference be the Interface number EX: Master 1/0/1 - Slave 2/0/1, is this all correct?
Thanks in advance.