DTS can't answer or dial

[MATOVTZ]

I have BC11 SP10 and sometimes DTS ext. can't answer or dial. I solve that with rfpui but is any other way?
<susip:dir=1501;
STATUS INFORMATION AT 09:28:12 10MAR04
DIR TYPE TRAFFIC STATE/PTR LINE STATE/PTR DIV STATE ADD INFO
1501 DTS SPEECH #023C FREE #0321
ODN1:IDLE
ODN2:IDLE
ODN3:IDLE
END
Matovtz

 

[singhbrindisi]

MATOVTZ:
May be few experts here can confirm if you need this patch or not??
/* Patch : S90918A PR.Originator : lmfera */
/* PR.Product.No: 3/CAA1118662/01 PR.Revision : R3A */
/* PR.Unit : KLP1T1 */
/*----------------------------------------------------------------------*/
/* Fault.Descr.And.Explanation : */
/*CN 29 requirement is: to remove the software code lock introduced in */
/* BC10. This patch in the beginning was expected to be answered OK-AS, */
/* but now it is answered OK-GEN because it solves the CN 29 requireme */
/* nt. This is also the reason for the Short Description change. */
/* */
/* */
/*ORIGINAL DESCRIPTION: */
/* */
/*From Customer: */
/* */
/*WHEN ASSIGNING AN DIGITALEXTENSION(itype=20)TO AN ELU28 BOARD(ROF 137 */
/* 533/3 R2A)AND CONNECTING A PHONE(DBC21201 R7C)TO IT,THE PHONES DISPL */
/* AY DOES NOT WORK. THE DISPLAY SHOWS TEXT "SELFTEST OK" BUT AFTER THA */
/* T IT IS EMPTY.(THE PHONE DOES WORK).IF YOU CONNECT AFTER THAT A PHON */
/* E WHITH REVISION DBC21201 R3A THE DISPLAY WORKS.AND IF YOU AFTER THA */
/* T CONNECT AGAIN A DBC21201 R7C THE PHONE AND DISPLAY WORKS. YOU GET */
/* THE "EQU" TO WORK IF YOU FIRST CONNECT AN OLDER REVISION PHONE AND T */
/* HEN THE NEWER ONE. */
/* */
/*lmfera: Customer phone is dbc21201/01021 R7C

BR */

 

[MATOVTZ]

No, that was problem with BP phones on MD110.
Thanks

 

[MATOVTZ]

In Thread806-419299 user named patcher show example for BC9. Please, patcher can you (or somebody else) show this example for BC11.
Thanks!