Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

DTMF tones on ATA188

Status
Not open for further replies.
countrytime

countrytime

Vendor
Mar 30, 2007
204
US
Can I configure the CCM 3.3 to send the CALLED party ID using dtmf tones through an ATA? The app I want to use is a fax server which would be connected to the CCM through ATAs using FXO ports on the server. I would send dnis digits to a route point which was forwarded to a hunt group consisting of the ATA FXO ports. After the server answers the CCM them would need to send the dnis digits.
 
Status
Not open for further replies.

Similar threads

keyset6
  • Locked
  • Question
No Line Text Label on 9841 phones
Replies
0
Views
319
keyset6
keyset6
Qzwsa
  • Locked
  • Question
Inband DTMF to SIP device for zone paging
Replies
1
Views
182
LoPath
LoPath
Ahmed626
  • Locked
  • Question
Need to register NEC DT730G on CUCM
Replies
0
Views
181
Ahmed626
Ahmed626
Geordie12567
  • Locked
  • Question
Maximum concurrent calls on a SIP trunk with CUCM and Cube
Replies
2
Views
451
biglebowski
biglebowski
FONEGUY
  • Locked
  • Question
VG-310 - Polycom DTMF issues
Replies
1
Views
174
Almas134
Almas134

Part and Inventory Search

Sponsor

Back
Top