Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

DTMF Over H323 Trunk

Status
Not open for further replies.

Sandaruwan

Systems Engineer
Apr 12, 2021
1
LK
Hi All,

I am trying to interconnect NEC SV9100 with Mitel MXONE via an H323 trunk, following are the configuration commands i used on the Mitel side,


rocai:rou=2,sel=7110000000000010,trm=5,dist=30,disl=128,traf=03151515,serv=2110000001,sig=511110100091,bcap=001100;
rodai:rou=2,type=tl65,varc=00000111,vari=00000011,varo=00000000;
roeqi:rou=2,tru=1-1&&1-4;
roedp:rou=2,tru=all;
roddi:dest=11,srt=1,rou=2,adc=1606100000000250005000000000,ip=xx.xx.xx.xx;

Calls are working fine on both sides but i am not getting DTMF during the call from Mitel MXONE to SV9500, in the Wireshark trace i can see the user input in H245 protocol, but the information inside the packet is missing.

Please refer attached image for the Wireshark trace, please let me know how to manage the DTMF in Mitel side for H323 trunks.

[URL unfurl="true"]https://res.cloudinary.com/engineering-com/image/upload/v1630153489/tips/DTMF_in_H323_fn5pll.pdf[/url],

Thanks
Dinusha bandara
 
check ICAT for analog extensions
D5 = Type of signalling
0 FSK
1 DTMF
Type of standard
0 ETSI
2 Bellcore
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top