DTM Resource

[danthephoneman]

I know it is possible to put 3 DTM modules in the BCM 400, but I have only ever configured the 3rd one as a point to point.

Is it possible to configure 3 PRI's on a BCM 400?

 

[acewarlock]

Yes, programmed as secondary.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.

 

[danthephoneman]

Thanks Ace,

So I would set all three DTM Modules as follows,

Clocking being Primary,Secondary and internal. Or will it allow me to program 2 of the DTM modules as Secondary?

 

[Deweyhumbolt]

2 DTMs as secondary.

Adversity is Opportunity

 

[danthephoneman]

Thanks Guys.