Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

DTIM8 on Mfim50b

Status
Not open for further replies.

nitram11

Technical User
Nov 21, 2005
55
DE
there is one more new problem for me: we add a dtim8 also in a working 50b system; i have done this, the gateway is registered in web interface(via pgm 101, the gateay is vissible, and unter column "type" " it is shown in blue text, (which i can click, and a menue "station" appears with the 8 ports ); i am wondering now, what to do more, to activate the 8 Ports to live ?;
i have already give a test number to one port, which appears correkt in this menue "Station";
i have linked a terminal (LDP 7016) direct to the dtim, but get no signal to display.

Thanks for any advice!

Wishing a good new year for all members and greetings from germany !
 
Hello,

solved now; after reading an older discribtion; it was only a connecting problem with the LDP 70xx terminals; (the Rj 11 connector on tis terminals has RX/TX at pin 2/5 and not 4/5, as i thought).
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top