DT700 on the MXONE Ericsson via SIP

[Satellite1900]

hi,
are an experienced Ericsson
I need help.
I'm trying to record a phone dt700 on MXoN Ericsson via SIP protocol.
Enter the parameters on the phone, but he is registered in the PBX, automatically rebooting continuously.
advice on parameters to be included?
any ideas?
thanks

 

[belevedere]

The NEC DT700 IP phone uses NEC SIP. It will not work on a standard third party SIP system. It will work on the NEC Spherical system, however when connected it reloads the flash to a standard SIP protocol.

 

[lindelott]

however when connected it reloads the flash to a standard SIP protocol."
what do you mean?
dennyl89

 

[belevedere]

When connected to an NEC Sphericall system, it will automatically reflash to standard SIP. However I do not know of any other way to get the flash files except from a Sphericall system version 7.1 or higher.

 

[lindelott]

Hi Belevedere,
your first answer:
"The NEC DT700 IP phone uses NEC SIP. It will not work on a standard third party SIP system"
OK,I understand DT700 use NEC SIP proprietary protocol and I can't connect with thirdy party system thati is i.e Ericsson MXONE
But now I don't understand that you mean....
There is a chance to run DT700 with a standard SIP protocol connected to thirdy party SIP system?
Best regards
Dennyl89

 

[belevedere]

NEC has a server based system called the Sphericall system. That system uses Polycom standard SIP phones. When you plug one of them into the system it automatically updates the flash in the phone to the latest version. With the release of version 7.1, you can plug in an NEC SIP DT-700 phone in, and the Sphericall system will automatically update the flash to a standard SIP version that will work with the Sphericall system. That is the only way I know of to get the NEC DT700 phone a standard SIP flash into it. The files are not on NEC's support site.

 

[lindelott]

OK,now is much clear!
Do you know,how can I have this file?
Bye

 

[belevedere]

Sorry, but I do not have the file or access to one. Maybe someone else on the forum can assist you further.