DST / Time Zone

[RedTech443]

Testing something in my lab and noticed something a bit different in R8.1

For my main location I have NewYork EDT -0400 set ( see below for timezonectl output.

In previous version of CM I had location 1 set with a +00:00 off set and the time was correct. to EST Time zone.
Now with that same setting I am one hour ahead, So I have to change the offset to either -01:00 or change the DST rule from 1 to 0 works too.
Am I missing something here with why this seems different the previous versions? What is your location timezone offset setting for anyone using EDT Time Zone, with a DST rule of 1?



labadmin@labcma> timedatectl
Local time: Tue 2020-03-10 13:06:46 EDT
Universal time: Tue 2020-03-10 17:06:46 UTC
RTC time: Tue 2020-03-10 17:06:46
Time zone: America/New_York (EDT, -0400)
NTP enabled: no
NTP synchronized: yes
RTC in local TZ: no
DST active: yes
Last DST change: DST began at
Sun 2020-03-08 01:59:59 EST
Sun 2020-03-08 03:00:00 EDT
Next DST change: DST ends (the clock jumps one hour backwards) at
Sun 2020-11-01 01:59:59 EDT
Sun 2020-11-01 01:00:00 EST

 

[RedTech443]

The "set time" setting did not copy over from the old System during the migration for some reason.
It was set to 0, after typing set time and changing it to 1, I was able to set all the zone zone information to the correct time zones and offsets.