DSS keys on a line key? 1

[mextera]

I have a 32 button Series I set can I have DSS keys on the lines keys?

 

[pave35]

No.
Can only be done on 4, 8, and 16 button sets (Dterms without one touch keys)

 

[mextera]

Thanks but I have a 32 button set so what do I do add more Speed dials?

 

[grh959]

ACtually you can do a dss/blf key on buttons 17-32. check commands 73 and 94. assign 2 different memory blocks. also check command 1224 if you have an IPS / IVS2 as that data should be a 7. assign the speed dial button by setting one touch buttons by doing the following :

feature, button, enter ext w/ keypad, then feature

 

[3DNet]

On the 2000 it's Conf instead of Feature to program speed dial keys.

Check out CM90 in the command manual for more details on programming the extra keys on the 32-btn phone. You could set some of these keys to be DSS/BLF keys, but it takes a little work.

 

[mextera]

Thanks I'm using keys 07 and 08 as DSS but will not show BLF. I have 73 and 94 match with the following memory area 212002 in cm 90 key 7 is F1107 and key 8 is F1108

Thanks,
Mextera anything but Avaya

 

[grh959]

you are correct for conf button for station speed dial BUT for one touch memory it is feature, button, ext, feature.

 

[3DNet]

Thanks, grh. Taught me something new today!