DSP error message

[sensey]

Hello to You all.


I am having a litle problem with my cicso 1751-v. the problem is that i can make calls within the routers, but when i am in the first call, when i make the second one, it passess but disconects me the first that i made. I make a debug on de cisco and I get this message and I don't know how to find a solution for it.

16:38:22: %VTSP-3-DSP_TIMEOUT: DSP timeout on event 6: DSP ID=0x1: DSP error sta
ts, dsprm info(mips_released=0, grp=0, dsp=0, bsp_port=0, bsp_ts=0, vic_port=0,
vic_ts=0)

Any help will do.

thanks.

 

[Jsteve]

This is from Cisco Error decoder.

1. %VTSP-3-DSP_TIMEOUT: DSP timeout on channel [chars], event [hex]: DSP ID=[hex]: [chars] (call mode=[dec])
A timeout on DSP response has occurred.

Recommended Action: The DSP has been automatically reset. If this message recurs, copy the error message exactly as it appears on the console or in the system log, contact your Cisco technical support representative, and provide the representative with the gathered information.

Related documents-


Troubleshooting VTSP-3-DSP_TIMEOUT Error on Cisco AS5300 Access Server Platforms [Cisco AS5300 Series Universal Gateways]