DSM32 on BCM50

[sroggero]

Does anybody ever try to install a DSM32 on a BCM50 3.0... is it compatible?

BCM50 specs says 44 digitals stations... if DSM32 works it should be 76 instead... 32 + 32 + initial 12

Thanks all

 

[Deweyhumbolt]

Yes a DSM32+ will work on BCM50.

Adversity is Opportunity

 

[Dasheen]

yes it's compatible. 44 digital stations is most likely the max u can have on the BCM50.

 

[sroggero]

Thanks guys

 

[pccal]

You could in theory have 2 expansion cabinets & stick a 32 card in both. If the main box was fully key coded you would
have 76 digital sets & 4 analog trunks. Not a very good setup as nobody would be able to call out or in most of the time.

 

[sroggero]

Well.... with such setup you just setup VoIP Trunking with ITSP which provides SIP trunk without any REGISTER...like babyTEL... this the SIP key code are way too expensive...