DSC ESN138 Error 2

[McGruff753]

I need some help on this. I am trying to change DN 7129 from Aspect to Meridian. All of my 712's are built as DSC's in LD 87. I deleted 712 and started to build 7120, 7121, etc, as individual DSC's. When I got to 7124, I got ENS138 which states I have exceeded the DSC's allowed. Can I increase the setting locally, or am I stuck purchasing something? Thanks.

 

[wdhb]

In LD86

REQ prt
CUST 0
FEAT esn

MXLC 10
MXSD 200
MXIX 0
MXDM 200
MXRL 200
MXFC 0
MXFS 0
MXSC 500 = this setting is how many steering codes have been allocated. The maximum is 8000 to 32000 depending on your switch type & market

 

[Cawho]

Hello there,
you can make your maximum higher in LD 86.
REQ CHG
CUST 0
FEAT ESN
. (press enter till you get MXSC prompt)
...
MXSC (up to 10 000) but don't put the max.add as many you need and a little more, depends on memory you have.
...
.
Go print it first still in LD 86.
REQ PRT
CUST 0
FEAT ESN
...
.
Good Day


Cawho
PBX.Tech

 

[McGruff753]

YOU GUYS ROCK. Thank you so much. My option 11 was set for 200 at MXSC. I bumped it up to 500 for now. Thanks again.

Mike